SOS Smart Outdoor Sensor

Descriptions

SOS is a wall mounted unit of an air type transmitter that is installed in the outdoor. It provides a stable, repeatable, reliable and accurate means of measuring both temperature and humidity. The polymer capacitance sensor used in the SOS is not affected by any condensation, high humidity or contaminants present in the measure environment.

Built with miniaturized electronics the SOS sensor is inter-changeable thereforerequiring no recalibration at all. A completely plug and play solution for quick and easy installation that minimizes installation & maintenance costs. Its sophisticated integrated circuits design provides a fully humidity and temperature compensated 4-20mA-output signal. The SOS enclosure is made of ABS plastic.

Features

  • Sensor Element: NTC & HIH4000.
  • Input A/D Resolution: 12 bits.
  • Sensing Range: Temperature (0 – 70 Deg C) And Humidity (0 – 100 % rh).
  • Output: 2 x 4~20 mA, Five-Wire Connection For Measuring Temperature And Humidity.
  • Interchangeability: The Transmitter (That Are Sensor And Electronic) Is Interchangeable With Other Transmitters.
  • LCD Display: Display Temperature And Humidity Including Temperature And Humidity Set-point Value.
  • Communication: RS-485.
  • Protocol: Modbus RTU.
  • Power Supply: 12 – 24 Vdc.
  • Mounting: Wall or Panel.

  • Hardware & Software Specifications

    SOSTO
    SOSTH
    SOSOH
    Temperature Sensor
    N/A
    Humidity Sensor
    N/A
    Power Supply
    12 - 24Vdc
    Power Consumption
    6 VA
    Input A/D Resolution
    12 bits
    Output Signal
    2 x 4~20mA
    Accuracy
    Temperature (±0.1°C @ 25°C / ±0.2°C (0°C to 70°C)) and humidity
    (±2%RH (10…90%) / ±4%RH (0…10%; 90…100%))
    Response Time
    For temperature: 10s (still air) / 10s (with 3m/s air speed).
    For humidity: 4s (still air) / 4s (with 3m/s air speed)
    Communication
    2 wire RS-485
    Baud Rate
    9600 bps
    Protocol
    Modbus RTU
    Surge Protection
    15KV ESD for serial port
    Operating Condition
    0~+70°C / 0-100% RH, non condensing
    Storage Condition
    -20~+70°C / 0-100% RH, non condensing
    Mounting
    Wall or Panel
    Protection
    IP30
    Weight
    240 g
    Dimensions
    110mm x 39mm

    Hardware Dimentions